Manufacturing
The factory, in numbers.
What a sourcing audit would ask first: floor area, people, machines, inspection points and how goods leave the building. Every figure shows how it is counted and when it was last checked.
Facility & people
- Production sites
- 6
- Each 1,500 m² or larger.
- As of
- Production lines
- 8
- Cutting, sewing, seam taping and finishing.
- As of
- Machines
- 276
- Listed by process below.
- As of
- Staff
- 216
- 80% of frontline staff have 4+ years' experience.
- As of
| Department | People | Share |
|---|---|---|
| Pattern & development | 8 | 3.7% |
| Cutting | 12 | 5.6% |
| Sewing | 120 | 55.6% |
| Seam taping & special processes | 16 | 7.4% |
| Quality control | 12 | 5.6% |
| Packing & warehouse | 14 | 6.5% |
| Management & sales | 34 | 15.7% |
| Total | 216 | 100% |

Equipment
What's on the floor.
Grouped by process step. 276 machines in total.
24 machine groups
| Machine | Qty | Process |
|---|---|---|
| Cutting tables | 2 | Cutting |
| Fabric spreaders | 2 | Cutting |
| Straight knives & end cutters | 5 | Cutting |
| CAD pattern plotters | 2 | Pattern |
| Lockstitch machines — Jack A4-8000D | 104 | Sewing |
| Overlock machines (3/4/5-thread) | 43 | Sewing |
| Double-needle machines | 25 | Sewing |
| Edge-trimming lockstitch machines | 7 | Sewing |
| Walking-foot machines | 5 | Sewing |
| Coverstitch machines | 3 | Sewing |
| Template sewing machines | 3 | Sewing |
| Programmable pattern sewers | 3 | Sewing |
| Automatic pocket-welting machines | 2 | Sewing |
| Feed-off-the-arm machine | 1 | Sewing |
| Bartack, buttonhole & snap machines | 29 | Bartack & snaps |
| Seam-taping machines | 6 | Seam taping |
| Printing machines | 3 | Printing |
| Fusing presses | 7 | Finishing |
| Ironing presses | 7 | Finishing |
| Vacuum tables & thread suckers | 3 | Finishing |
| Steam generators | 3 | Finishing |
| Heat sealers | 2 | Packing |
| Strapping machine | 1 | Packing |
| Air compressors | 8 | Utilities |

276 machines in total. The model is on record for the lockstitch machines only; the rest are listed by type.
Quality
Seven inspection points, ending in a final AQL check.
Final inspection to ANSI/ASQ Z1.4. Third-party inspection is welcome, and so are factory audits.
Incoming fabric & trims
Shade, specification and defects checked as materials arrive.
Pre-production sample
Approved by you before bulk cutting begins.
Cut-panel check
Cut panels checked before they go to the line.
Inline inspection
Size, stitching and workmanship checked during sewing, and reworked as found.
Seam-taping check
Taped seams checked at the seam-taping station.
Finishing check
Thread trimming, pressing and stain removal checked after finishing.
Final AQL inspection
Statistical sampling to ANSI/ASQ Z1.4 before packing.

Traceability
- Batch numberOn every piece, traceable to line and date
- RejectsDestroyed, never resold
- Third-party inspectionWelcome
- Factory auditsWelcome
Testing
Chemical and harmful-substance tests are run by independent labs. Two recent reports, both passed: a chemical safety test — REACH SVHC (253 substances), azo dyes (EN ISO 14362-1), formaldehyde (EN ISO 14184-1) — and a harmful-substance test to baby-article limit values. Shenzhen Tianqi Testing, 2026. See the reports
Virtual factory tour
A 360° tour is on the way.
We're preparing a walk-through of the cutting, sewing, seam-taping, inspection and warehouse floors. Meanwhile, factory visits are welcome — and so are factory audits.
How an order runs
Sixteen steps, from inquiry to after-sales.
Bulk ships in 45–60 days after the pre-production sample is approved. The first sample is ready in 48 hours.
Inquiry
Style, quantity, fabric, specification and delivery date confirmed.
1 day · SalesTech pack
Design confirmed and the process sheet issued.
1–2 days · DesignPattern & grading
Pattern made and graded to the size set.
1 day · SamplingSampling
First sample and revision samples. First sample in 48 hours.
2 days · SamplingQuote & order
Price agreed and the order placed.
1 day · SalesMaterials in
Fabric and trims bought and checked on arrival — shade, specification, defects.
3–5 days · Purchasing & QCPre-production sample
Sent for your approval before production starts.
2 days · SamplingCutting
Marker, spreading, cutting and bundle numbering.
1–2 days · CuttingSewing
Group assembly lines.
By order size · SewingSeam taping
Taping and other special processes.
2–3 days · ProductionInline inspection
Size, stitching and workmanship checked during production, reworked as found.
During production · QCFinishing
Thread trimming, pressing and stain removal.
0.5–1 day · FinishingFinal inspection
AQL sampling inspection of the finished goods.
0.5–1 day · QCPacking
Folding, hangtags, bagging and cartons.
0.5–1 day · PackingShipping
Packing list, customs documents and tracking.
1 day · Sales & warehouseAfter-sales
Complaints, repairs and reorders.
Ongoing · Sales
Warehouse & shipping
Packed to your spec, shipped on your terms.


- Warehouse5,000 m²
- In stock200,000 pcs
- Bulk lead time45–60 days
- Sampling7–10 days
- First sample48 hours
- MOQ300 pcs per color
- Payment30% deposit, 70% against copy of B/L
- Incoterms & portYour choice
- PackingTo your specification
As of . Lead time counts from pre-production sample approval. Need it sooner? Contact our sales team.